Commercial engineers · Regional network
    Mikrofill Boilers manufacturer logo
    Commercial boiler manufacturers

    Mikrofill Commercial Boiler Repairs & Servicing

    Mikrofill commercial boiler repairs, servicing and maintenance start with the exact model and installation. Ethos 70 / 90 / 110 / 130, Ethos 350 / 550 are identified separately. London, South East and M25 coverage; other postcodes and equipment scope are confirmed by the provider.

    Gas Safe Registered
    UK regional provider network
    Call central booking020 8935 5572
    Book an Engineer

    Mikrofill commercial range

    Mikrofill is a British manufacturer best known for pressurisation equipment, and its commercial condensing boilers — the wall-hung Ethos range and the floor-standing Ethos 350/550 range — share that plant-room heritage. A site with Mikrofill boilers may also have Mikrofill pressurisation units, and both identities should be recorded: the pressurisation equipment is often central to pressure-loss complaints. Record the full boiler model, output and serial number; regional providers familiar with the equipment confirm scope without claiming manufacturer approval.
    • Ethos wall-mounted and Ethos 350/550 floor-standing are documented separately.
    Call 020 8935 5572 →Request a quote →

    Independent Mikrofill engineering support

    Independent Mikrofill boiler diagnosis and maintenance is arranged through the Commercial Boiler Repair regional network. Commercial Gas Safe competencies and familiarity with the identified equipment are checked before work is agreed. Manufacturer authorisation is not claimed. London, the South East and M25 are the confirmed operating area; other postcodes require provider confirmation.
    Call 020 8935 5572 →Request a quote →

    Mikrofill model identification

    Ethos wall-hung boilers and Ethos 350/550 floor-standing boilers are documented separately, with stainless-steel condensing heat exchangers and their own control arrangements. Mikrofill literature also covers direct-fired water heaters, which are a different appliance category covered on this site’s water-heater pages rather than here. Output, hydraulic and flue data come from the specific model’s technical sheet.
    • Record any Mikrofill pressurisation unit alongside the boilers.
    Call 020 8935 5572 →Request a quote →
    Mikrofill model identification
    Range / modelEquipment and generationWork assessed after identification
    Ethos 70 / 90 / 110 / 130Wall-mounted heating boilers; manufacturer product status requires confirmationBreakdown diagnosis, servicing, controls and compatible component replacement; exact model and provider scope confirmed first.
    Ethos 350 / 550Floor-standing twin-burner heating boilersBreakdown diagnosis, servicing, controls and compatible component replacement; exact model and provider scope confirmed first.

    Mikrofill repairs and fault investigation

    Pressure-related complaints on a Mikrofill installation deserve a combined view: boiler pressure supervision, the pressurisation unit’s operation, expansion-vessel condition and any system leaks. Ignition and temperature faults follow the boiler’s documented sequence with measured circulation and sensor verification. Where several boilers share plant, the common equipment — including the pressurisation package — is assessed before individual components are replaced.
    • Pressure-loss diagnosis includes the pressurisation package and expansion vessels.
    Call 020 8935 5572 →Request a quote →

    Symptoms to report on Mikrofill equipment

    For Mikrofill equipment, note whether the problem occurs at start-up or under load, and identify the affected Ethos 70 / 90 / 110 / 130. Possible causes remain hypotheses until the installation is checked. Do not remove covers, adjust gas components or repeatedly reset an unexplained lockout.
    Call 020 8935 5572 →Request a quote →
    Symptoms to report on Mikrofill equipment
    What you observeUseful information to provideProfessional investigation
    Failure to start / repeated lockoutEthos 70 / 90 / 110 / 130 plate, original message and timing of failed startSupply under load, ignition and flame detection; shared permissives checked before selecting a part
    Overheating / poor heat deliveryMikrofill temperatures, pressure trend and which boilers are affectedActual circulation, sensors, heat-transfer condition and distribution
    Intermittent operation / whole bank stopsMikrofill control history, demand status and affected appliance countCommon enable, pumps, pressurisation and sequencing alongside individual faults

    Mikrofill displayed fault codes

    Send a photograph of the Mikrofill commercial boiler data plate and complete displayed message, including any subcode. The engineer matches the appliance and controller to its own manual before interpreting it. A domestic or overseas code list is not a safe substitute; there is no universal Mikrofill code table.
    Call 020 8935 5572 →Request a quote →

    Mikrofill servicing and planned maintenance

    Servicing follows the model-specific procedure for burner and exchanger inspection, approved stainless-steel cleaning, condensate maintenance and reassembly seals. Combustion verification at prescribed conditions, applicable gas tightness testing and control checks follow the work. Book through ServiceM8 with the boiler and pressurisation-unit identities, symptoms and access details; pricing reflects equipment count, access, service materials and diagnosis.
    • No fixed prices; regional providers quote after reviewing the asset details.
    Call 020 8935 5572 →Request a quote →

    Compatible Mikrofill replacement parts

    Mikrofill spares are identified by full model, output and serial application against OEM references. Boiler components and pressurisation-unit components are catalogued separately; neither should be substituted with undocumented pattern parts. Availability is confirmed at the time of enquiry, and any control replacement is verified operationally after fitting.
    • Mikrofill direct-fired water heaters are covered on the water-heater pages.
    Call 020 8935 5572 →Request a quote →

    Mikrofill cascades and connected plant

    A Mikrofill site can have Ethos boilers and a separately identified pressurisation package. Pressure complaints require both identities, expansion provision and leak history. Twin-burner Ethos equipment is assessed by firing stage and common water path rather than through a wall-mounted boiler checklist.
    Call 020 8935 5572 →Request a quote →

    Repair or replace Mikrofill equipment?

    Ethos repair planning needs the exact wall-mounted or floor-standing generation and confirmation of current support. Manufacturer pages differ on wall-mounted product status, so no current-stock promise is made. EXTREME is hot-water equipment, not the floor-standing heating boiler used for this comparison.
    Call 020 8935 5572 →Request a quote →

    Mikrofill quotation and repair authorisation

    A Mikrofill commercial boiler quotation depends on the identified range, number of appliances, diagnostic time, access, service materials and compatible parts. Regional providers set their own prices: there is no fixed national tariff. Ask the provider to confirm VAT treatment, what attendance covers, testing and any return visit before authorising the job. Routine servicing does not automatically include an existing breakdown or wider building-system repairs. Additional work is explained and agreed separately.
    Call 020 8935 5572 →Request a quote →

    Coverage and booking for Mikrofill

    London, the South East and M25 are the confirmed coverage for Mikrofill commercial boiler requests. For any other postcode, the regional provider must confirm availability and the required equipment competencies before an appointment is agreed. Book an Engineer and Request a Quote both open the same ServiceM8 request.
    • Provide the postcode, Mikrofill model and serial plate, fault-code photograph and symptoms.
    • State the number of boilers affected, whether heating or hot water is unavailable, and any cascade or BMS details.
    • Include site access arrangements, urgency and a contact person. Submitting a request does not guarantee attendance or parts availability.
    Call 020 8935 5572 →Request a quote →
    Related services

    Related services, equipment & advice

    Commercial Boiler Brands & Models

    Find commercial boiler repair and servicing by manufacturer and model family. Explore Ideal, Hamworthy, Remeha, Potterton, Worcester Bosch, Vaillant,.

    Find out more

    Boiler Fault Codes & Diagnosis

    Fault-code diagnosis for commercial boilers combines the exact manufacturer code with the symptoms and operating history. Codes differ between brands.

    Find out more

    Commercial Boiler Servicing & Maintenance

    Commercial boiler servicing is a model-specific inspection, clean and safety/combustion assessment by a Gas Safe registered commercial engineer..

    Find out more

    Commercial Boiler Ignition & Burner Faults

    Commercial boiler ignition and burner faults include failure to light, flame loss and unstable combustion. Diagnosis separates gas supply, combustion.

    Find out more

    Commercial Boiler Parts Replacement

    Commercial boiler parts replacement follows confirmed diagnosis and model-specific compatibility checks. Browse internal heat exchangers, gas valves,.

    Find out more

    Commercial Boiler: Repair or Replace?

    Repair or replacement should be a condition-led decision. Compare the confirmed fault, safe repair options, approved parts availability, cumulative costs.

    Find out more

    Commercial Boiler Repair London

    Gas Safe registered commercial boiler engineers for London, the South East and sites within the M25. Breakdowns, servicing and plant rooms.

    Find out more

    Commercial Boiler Repair Costs

    How commercial boiler work is quoted: the cost factors, attendance scope and repair authorisation. Regional providers set their own prices on request.

    Find out more

    Contact Commercial Boiler Engineers

    Call 020 8935 5572 or book online. Have your site postcode, boiler make and model and any displayed fault code ready.

    Find out more

    Commercial Heating & Plant Room Repairs

    Commercial heating and plant-room repairs address the connected equipment that enables boilers to deliver heat: circulation pumps, pressurisation.

    Find out more
    Other equipment

    Also serviced: gas water heaters and warehouse heaters

    Separate from boiler work, we also arrange repair and servicing for commercial gas-fired water heaters and warehouse space heaters.

    Commercial gas-fired water heaters Commercial warehouse & space heaters

    Frequently asked questions

    Does Mikrofill make pressurisation units as well as boilers?

    Yes. Mikrofill’s pressurisation heritage is relevant because the boiler and pressurisation package are often diagnosed together on pressure complaints.

    Are wall-mounted and floor-standing Ethos the same boiler?

    No. They are separate wall-hung and floor-standing ranges with their own documentation.

    Where are Mikrofill water heaters covered?

    On this site’s commercial water-heater pages; this page covers heating boilers.

    What should a Mikrofill booking include?

    Boiler model and serial, any pressurisation-unit identity, the fault description, postcode and access information through ServiceM8.

    Is EXTREME a floor-standing Mikrofill heating boiler?

    No. The relevant floor-standing heating-boiler references are Ethos 350 and 550; EXTREME is a different hot-water product category.

    Does a download marked current prove wall-mounted Ethos is still sold?

    No. Product status and spare support must be confirmed directly for the installed generation; a document label alone is insufficient.

    Manufacturer information

    Book a commercial boiler engineer

    Share the site postcode, boiler make and model, symptoms and access requirements. The central booking operation routes your request to the appropriate regional provider, who confirms availability, scope and pricing.

    Book an EngineerRequest a QuoteCall 020 8935 5572